![]() ![]() To prevent Network Manager touching the card, you need to edit /etc/network/interfaces as root (use sudo under Ubunut) and add the interface as a manually configured card. This video continues from the previous YFi Hotspot Manager Setup and covers how to install and Configure the CoovaChilli Captive Portal Software with YFi Hot. You can ether disable the network card in Network Manager, or prevent Network Manager even touching the card. However, if you have a GUI installed, you probably have network manager which will attempt DHCP on all network cards when plugged in. ![]() If you followed my Ubuntu Server installs, then this is where you should be. The other network card needs to be setup with NO configuration. Chilli is running on the NetModule router and has three major interfaces: A downlink interface for accepting connections from clients - typicaly the WiFi interface. This might be via DHCP to a ADSL Modem, or static direct to your ISP. One network card needs to be connected and configured for the internet. The computer needs 2 Network cards at least. Currently my custom packages aren’t compiled for anything other than standard x86 hardware, but if you wish to compile coovachilli for arm for example, then you’ll be able to run the rest of the software too (hopefully). Some people are having problems with the hardware setup, so hopefully this will assist.įirst, you need a computer that can run Ubuntu or Debian, 32bit or 64bit. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |